High & Low Pressure Nozzles

High & Low Pressure Nozzles

• Crestar is offering a 1″ select flow nozzle with pressure rating of 580 PSI (40 BAR)
• It is not recommended to operate any combination straight stream/fog nozzle below 50 PSI
• Crestar low pressure nozzles are designed to deliver flows at lower pressure giving the operator improved control, comfort and maneuverability.
• See pages 1-3 of the brochure for further information on select flow, constant flow and automatic nozzles.
• It is not recommended to operate any combination straight stream/fog nozzle below 50 PSI
• All 1.5″ and 2.5″ can be set for low pressure applications.

Select Flow High Pressure
Flow Setting
Item
Inlet
PSI/BAR
GPM
LPM
SF 40-HP
1”
580/40
5-10-24-40
19-37-90-150
Select Flow Low Pressure
Flow Setting
Item
Inlet
PSI/BAR
GPM
LPM
SF 125-LP75
1.5”
75/5
30-60-95-125
50-90-115
SF125LP-75
Tip Only
1.5”
 
75/5
 
30-60-95-125
 
50-90-115
 
SF 200-LP75
1.5” & 2.5”
75/5
95-125-150-200
360-475-550-750
SF200LP-75
Tip Only
1.5”
 
75/5
 
95-125-150-200
 
360-475-550-750
 
SF 200XLP-75
 
1.5” & 2.5”
 
75/5
 
30-60-95-
125-500-200
115-230-360-
475-550-750
SF 250LP-75
2.5”
75/5
95-125-150-200-250
360-475-550-750-950
SF200LP-75
Tip Only
1.5”
 
75/5
 
95-125-150-200
 
360-475-550-750-950
 
Constant Flow Low Pressure
Flow Setting
Item
Inlet
PSI/BAR
GPM
LPM
CF 95LP-50
1.5”’
50/3.5
60, 95, or 125
230, 360, or 475
CF 95LP-75
1.5”
75/5
60, 90, or 125
230, 360, or 475
CF 200LP-50
1.5” & 2.5”
50/3.5
150, 200, or 250
550, 750, or 950
CF 200LP-75
1.5” & 2.5”
75/5
150, 200, or 250
550, 750, or 950
CF 200LP-50
Tip Only
1.5”
 
50/3.5
 
150, 200, or 250
 
550, 750, or 950
 
CF 200LP-75
Tip Only
1.5”
 
75/5
 
150, 200, or 250
 
550, 750, or 950
 
CF 250LP-50
2.5”
50/3.5
200, 250, or 300
750, 950 or 1140
CF 250LP-75
2.5”
75/5
200, 250, or 300
750, 950, or 300
Automatic Flow Low Pressure
Flow Setting
Item
Inlet
PSI/BAR
GPM
LPM
AF 125LP-75
1” & 1.5”
75/5
10-125
40-475
AF 200LP-75
1.5”
75/5
70-200
265-750
AF 350LP-75
2.5”
75/5
50-350
190-1325

*available in your custom thread – call for details